Раздел Последнее сообщение Темы Сообщений
ОБЩИЙ РАЗДЕЛ

Драйвер elm327 usb для windows 10

This article will guide you how to install ELM327 USB cable/scanner on your Windows computer. It will then work with OBD2 software (like award-winning TOAD ) and your car. (If you don't do this, This article will guide you how to install ELM327 USB cable/scanner on your Windows computer. It will then work with OBD2 software (like award-winning TOAD ) and your car. (If you don't do this, then OBD software is not going to work. So it's CRUCIAL that you follow below steps). Guide for Installing ELM327 Bluetooth on Windows Guide for Installing ELM327 WIFI on Windows STEP 1: Download and Install Latest Tested ELM-327 Driver Files (Cable should NOT be connected to your laptop yet. Only connect it when instructions say so.) Windows XP, Vista, 7: If you bought genuine ELM327 cable from Total Car Diagnostics - then you only need to install DRIVER PACK 3 . After install, go to Step 2 to test it's working ok. If you bought ELM327 cable from elsewhere (clones, eBay, other manufacturers) then install all Driver Packs below . because they cover widest range of chip makers. Steps to install Driver Pack 1: If you have 64-bit Windows, double-click on: CP210xVCPInstaller_x64 If you have 32-bit Windows, double-click on: CP210xVCPInstaller_x86 Go to Step 2 below to test if everything is working ok. Windows 8, 10: If you bought genuine ELM327 cable from Total Car Diagnostics here . then you only need to install DRIVER PACK 3 . Then go straight to Step 2 to test it's working ok. If you bought ELM327 cable from elsewhere (clones, eBay, other manufacturers) then install all Driver Packs below . because they cover widest range of chip makers. Steps to install Driver Pack 1: If you have 64-bit Windows, double-click on: CP210xVCPInstaller_x64 If you have 32-bit Windows, double-click on: CP210xVCPInstaller_x86 Steps to install Driver Pack 5: Connect ELM327 cable to your laptop. Then. Go to: Control Panel » System » Device Manager » Ports (COM & LPT) Right-click on it » Update Driver Software Click "Browse my computer for driver software". Select "Let me pick from a list of device drivers on my computer". Install. That's it! The yellow triangle next to "Prolific. " should be gone. Go to Step 2 below to test if everything is working ok. STEP 2: Test if ELM327 USB Cable is Installed Correctly (You can now CONNECT your ELM327 USB cable to any port on the laptop.) Ok, we're almost ready to start scanning your vehicle. First, let's ensure that everything is working fine! Step 1: Access Device Manager Windows Vista/7/8/10: Control Panel » System » Device Manager Windows XP: Control Panel » System » "Hardware" tab » Device Manager Step 2: Expand "Other Devices" and "Ports (COM & LPT)" Notice any device with any one of the following names: FT232R USB UART Prolific USB-to-Serial. USB Serial Port USB2.0-Serial Silicon Labs CP210x USB to UART Bridge If none of the above has a yellow mark, then congratulations! You're ready to begin scanning your car(s). Click here on how to connect to your car in the next 5 minutes. If any one of above devices has a yellow mark, then: Right-click on that device » Uninstall Unplug cable Restart PC Download and unextract DRIVER PACK 6 Double-click on "InstallUSB" to install Connect cable to laptop. Yellow mark should now be gone. Success! If yellow mark is STILL not gone after doing 1-6 above, then do this: a) While cable is plugged in, right-click on device with the yellow mark. b) Click on: Update Driver Software c) Choose: Browser my computer for driver software d) Browse to and select folder where you unextracted Driver Pack 6. Make sure "Include subfolders" is ticked ON. e) Click on: Next f) If you get RED warning, choose: Install this driver software anyway g) After it installs successfully, another yellow mark may appear under "Other Device". Eg: h) If g above is true, then do steps a-f for "Unknown Device". It may also show as "COMx". Even DRIVER PACK 6 didn't help? Then likely it's a "Code 10 error" next to "Prolific USB-to-Serial" device. Click here to fix that. How To Scan or Diagnose Your Car with OBD2 Software. Step 1: Install your OBD software (if you don't have it — get our professional TOAD OBD software ). Don't launch it yet. Step 2: Connect ELM327 cable to your computer and car. Step 3: Place the key in the ignition and turn it forward to "ON" position. (Position where all dashboard lights are on. This is one position before engine starts.) Step 4: Start your OBD diagnostic software. Click " Connect ", and it should instantly auto-connect to your vehicle. That's it! TIP: If you want maximum data reported from the car — turn on the engine. And yes, you can safely drive the vehicle while diagnosing it. Keep eyes on the road at all times.

Драйвер hp deskjet 3050a
Драйвер nvidia quadro nvidia
Как установить драйвер на звук
Драйвер ati radeon hd 4350
Драйвера hp pavilion dv6700
Драйвер графики для windows 7



  Есть новые сообщения
  Нет новых сообщений

Часовой пояс GMT +4, время: 15:55.


Работает на vBulletin® версия 3.7.2.
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Перевод: zCarot
OstrovOK